fbpx

New! ThermGard TG50 Roof Glazing System

  • Wide Spans
  • Low Pitch
  • Non-Fragile

Shop Online For A Wide Selection Of Rooflights

Lonsdale Roofing

PlasGard Glazing Bars for Glass or Polycarbonate

PLASGARD GLAZING BARS

Glazing Bars

GLAZING BARS FOR GLASS OR POLYCARBONATE

PlasGard is a simple two part glazing bar with continuous screw on cap. Approved by all the major polycarbonate sheeting manufacturers for use with multi-wall and solid plastics, PlasGard is also suitable for single glazing with glass from 6mm to 25mm. Ideal for unheated spaces such as canopies, verandahs, car ports, shelters or rail platforms. Easy to install, PlasGard glazing bars offer excellent value and a wider glazing rebate providing superior glass retention for exposed locations or areas where bomb-blast mitigation is required making it ideal for large public transport hubs and rail stations.

“Various challenges have been dealt with to deliver this spectacular achievement” Simon Matthews, KIER, Kings Cross Station

Why not also take a look at our SkyGard Traditional Patent Glazing Bars?

Span Table

Section Polycarbonate (mm) Single Glazing (mm) Double Glazing (mm)
PLM 15 1500
PLM 17 2500 2000 1200
PLM 20 4000 3400 2800

Please note the above table is for guidance only, for although the glazing bars can be used in compliance with the requirements of BS5516 PlasGard maximum recommend spans may not always comply. If in doubt please contact our Technical Department. A more detailed table is published in the LMC Design guide.

Glass Widths

PLM 15 & 17 = Glazing Bar c/c – 20mm

PLM 20 = Glazing Bar c/c – 14mm

PlasGard is a tried and tested product installed throughout the UK and abroad. Some notable projects include Malmaison Hotel Manchester, Liverpool Limestreet Station, Jacobs Biscuit Factory, Waitrose and Sainsbury’s stores.

Galleries

Request A Call Back

FAQs

What are PlasGard glazing bars made of?

PlasGard glazing bars are made of aluminium alloy 6063-T6. It is most commonly used as an architectural alloy in intricate extrusions because of its high corrosion resistance and welding capabilities. 

Do PlasGard Glazing Bars provide insulation? 

PlasGard Glazing Bars do not provide insulation. If you require a thermally broken system for insulation purposes, please consider our ThermGard ALM100 & TG50 systems, which provide enhanced insulation. 

What are PlasGard glazing bars used for?

PlasGard glazing bars are suitable for single glazing with glass from 6mm to 25mm and are used to divide a single pane of glass into smaller panes. They help to enhance the rigidity and structural integrity of your windows and make your windows look very aesthetically pleasing.